To wire in an accessory to your Ryker, F3 or Spyder. use this Video “Can-Am Spyder, Ryker, and RT - Accessory Circuits. This is the best way to install accessories”. Note the RT is 2020+. For older RT models, from the front of the spyder with the Frunk open, at the back of the Frunk, down low on the Right Hand Side, behind a rubber grommet are two wires similar to those shown on the F3 model in the video. These are the accessory wires on an early RT.

Shaking Mirrors - 2018 or newer F3 T and Limited, 2020+RT - 2 options to cure shaking mirrors. One from Martin The Vlogger, and another from Martin Bell at Australian Spyder Ryders. See This video at about 1:40 for what can happen if not treated.

Magnetic Mirror Mounts - 2012 to 2019 RT. Sick of taking the mirrors off by giving them a thud, get some of these from Martin Bell at Spyder Ryders Australia. Original Magic Mirrors were made in Tasmania and are now sold to Lamonster.